290HP
/ 350 Long Block Pre-Emissions GM Crate Engine
Call
us toll-free at 1-800-926-4977 ext. 1232 (or 330-792-5258) between 7:30 a.m. and
9 p.m. EST Monday through Friday and 8 a.m. 'til 1 p.m. Saturdays about this
exclusive Greenwood Chevy Performance Parts special!
The HP 290 horsepower will provide great
long term durability with its 4-bolt mains, PM steel rods, strong cast aluminum
pistons. The camshaft has .450" intake and .460" exhaust lift with
hydraulic flat tappets. The cast iron cylinder heads have 1.94" intake and
1.50" exhaust valves with 76 cc combustion chamber. The heads have the
conventional 12 bolt intake manifold attaching design used from 1955 through
late 1980. This engine was designed to work with the following components:
intake manifold 10185063, HEI distributor 93440806, balancer 6272221, flex plate
471529,you will also need a small block starter, water pump and fuel pump.
This 350 engine is not intended for marine
use, and should be used in 1979 or earlier pre-emissions street vehicles or any
off road usage.
Technical Notes: GM Crate Engines are
horsepower rated to SAE Standards.
This engine is not intended for vehicles
with fuel injection. This engine is designed for carburated applications prior
to 1985.
Specifications
| Part Number: |
12499529 |
| Manufacturer: |
GM Performance Parts |
| Horsepower : |
290 @ 5100 RPM |
| Torque : |
326 @ 3750 RPM |
| Compression Ratio : |
8.5:1 |
| Block : |
Cast Iron 4-Bolt Main |
| Heads, Chamber Size : |
Cast Iron |
| Valves (I/E) : |
1.94"/1.50" |
| Camshaft, Lift (I/E) : |
.450"/.460" |
| Intake : |
Not Included |
Part number #12499529
Only $1,899.00*
* Price subject to change without notice
GM PARTS WARRANTY INFORMATION:
Due to the nature and intended usage of GM Performance Parts, the parts available on this website and in our walk-in store (except for engines and partial engines) are sold without any express or implied warranty of merchantability or fitness for a particular purpose. The entire risk as to the performance of such parts is with the buyer. Should such parts prove defective following their purchase, the buyer and not the manufacturer, distributor, or retailer, assumes the entire cost of all necessary servicing, repair, damage or loss to property and consequential damage. "Engine and Partial Engine Warranty" under the provisions of the General Motors Dealer Service Parts and Accessories Warranty Section 1.1.3a, engines and partial engines, including partial engines in kits, are warranted against defects in materials and workmanship. This warranty specifically excludes engines and partial engines used in racing or competition or that fail as a result of alteration. These engines and partial engines are not designed or approved by General Motors for marine use. Installation of GM Performance Parts may adversely affect GM New Vehicle Warranty. Please consult your dealer for terms and conditions.
