|
330
HP 350 HO deluxe crate engine
Call
us toll-free at 1-800-926-4977 ext. 1232 (or 330-792-5258) between 7:30 a.m. and
9 p.m. EST Monday through Friday and 8 a.m. 'til 4 p.m. Saturdays about this
exclusive Greenwood Chevy Performance Parts special!
The 350 HO Deluxe
takes the value leading 350HO/330HP Crate Engine a step further by adding a
carburetor, distributor, water pump, torsional damper, and an auto trans
flexplate. This enhancement to the Vortec head 330 horsepower 350 HO makes it
easier than ever to repower your street rod, street machine or sportsman racer.
The 600 cfm vacuum secondary Holley carburetor is ideally suited to the 350 HO.
And the proven GM HEI distributor will give years of worry-free driving. With a
9.1:1 compression ratio, it's pump gas friendly, and with its muscle car idle
it's cruise night cool. With GM Performance Part's lowest priced small-block
crate engine there is no reason to rebuild that junk yard clunker and since it's
complete from carb-to-pan there is no need to chase parts ! Call us at
1-800-926-4977, ext. 232, to learn more about this great engine, which is
perfect for your 1975 or older vehicle or any off-road usage.
Horsepower ................................330 @ 5000
RPM
Torque .......................................380 Ft. Lbs. @ 3800
RPM
Maximum Recommended RPM ......5500
Compression Ratio .......................9.1:1
Block.... 10105123 - Cast Iron 4-Bolt with One Piece Rear Main Seal
Crankshaft..................................14088527 - Nodular Cast Iron
Connecting Rods.........................10108688 - Forged Steel
Pistons.......................................12361371 - Cast Aluminum
Piston Rings................................14089025
Camshaft ............................... 24502476 - Lift: .435" Int.,
.460" Exh.
Camshaft Duration @ .050"...........212° Int., 222°
Exh
Timing Chain................................14087014
Heads......12558060
- Cast Iron 64-cc Vortec Combustion Chambers
Intake Valves.............................10241743 -
1.94"
Exhaust Valves......................... 12550901 -
1.50"
Valve Springs..............................10212811
Rocker Arms ...............................10089648 - 1.5
Ratio
Valve Lash ..................................Zero
Spark Plugs ...............R44LTS - Gap at .045; 41-932 - Gap at .060
Ignition Timing ............................10° BTDC @ 700
RPM
Part number #12496968
$3,745.00*
*
Price subject to change without notice
Tech Tip
"Oil Filter & Oil Cooler Bypass Valves"
From Speed Reading by Wade Hajek of GM Performance Parts
Gen V and Gen VI big-block crate engines come with two oil pressure bypass valves
installed in the engine blocks. Both of these valves are rated at 11 psi pressure
differential. One valve is for the oil filter and the other is for the production oil
cooler. If you install an aftermarket oil cooler or remote oil filter that attaches to the
oil filter pad on the engine block, you should be aware that you need to change the oil
filter bypass valve in the engine block. The aftermarket oil lines add resistance which
will cause the bypass valve to bypass the aftermarket oil cooler and/or oil filter all the
time. Obviously, if the cooler and filter are bypassed the oil will be dirty and hot. Your
engine could run hotter and could be damaged by dirt in the oil. If you choose to use an
aftermarket cooler or remote oil filter that attaches to the pad, you should change the
bypass valve to one with a higher differential pressure rating. A good choice would be GM#
25161284 which is rated at 30 psi. Remove the valve that is closest to the crankshaft and
replace it with the new valve. Press the new valve into the engine block and stake it in
three places. You should note that the bypass valves don't need to be changed if you use a
production oil cooler which uses the production holes in the engine block and you don't
use a remote oil filter. Also, if you use an adapter that just angles the filter for
clearance you don't need to change the bypass valves.
GM
PARTS WARRANTY INFORMATION:
Due
to the nature and intended usage of GM Performance Parts, the parts available on
this website and in our walk-in store (except for engines and partial engines)
are sold without any express or implied warranty of merchantability or fitness
for a particular purpose. The entire risk as to the performance of such parts is
with the buyer. Should such parts prove defective following their purchase, the
buyer and not the manufacturer, distributor, or retailer, assumes the entire
cost of all necessary servicing, repair, damage or loss to property and
consequential damage. "Engine and Partial Engine Warranty" under the
provisions of the General Motors Dealer Service Parts and Accessories Warranty
Section 1.1.3a, engines and partial engines, including partial engines in kits,
are warranted against defects in materials and workmanship. This warranty
specifically excludes engines and partial engines used in racing or competition
or that fail as a result of alteration. These engines and partial engines are
not designed or approved by General Motors for marine use. Installation of GM
Performance Parts may adversely affect GM New Vehicle Warranty. Please consult
your dealer for terms and conditions.
|
|
|
|
| Welcome
to Greenwood Chevrolet -Parts
and
Pro-shop:
Looking for GM Performance
parts, aftermarket performance parts,
crate engine motors, and
intakes.
Browse the largest inventory
of GM Parts, GM Performance parts,
Chevy Parts,
engines, crate engines, warranty,
performance, restoration parts,
partial engines,
performance
parts, engine specials, accessories,
motors, crate engine specials,
crate
engine prices, Chevy crate,
Chevy, crate engine, 350 engine
on the web.
We can special order, accessories for
any make and model of gm vehicle,
and much more, shop online, call or stop in and see us.
|
|
